This is a database file with full configuration for the Canon W6400/W8400 machine.

The calibration was built with Canon SemiGloss Photo Paper installed and run at 1200 x 1200 dpi on Medium quality.

There are two printer ICC profiles included. One calculated on a first pass. The second corrected profile was an iteration based on Fogra ISO Coated ICC as the match. If you have a license to use this match profile then the corrected one will be more accurate. Otherwise use the initial uncorrected one which will still produce good results.

Use the Archiver to install the database and adjust the configuration as required. Compatible with Serendipity Blackmagic V3.1 and Serendipity Megarip V4.1 and above.

Download

This is a database file with full configuration for the Canon W6400/W8400 machine.

The calibration was built with Canon Semi Gloss Photo Paper installed and run at 2400 x 1200 dpi on High quality.

There are two printer ICC profiles included. One calculated on a first pass. The second corrected profile was an iteration based on Fogra ISO Coated ICC as the match. If you have a license to use this match profile then the corrected one will be more accurate. Otherwise use the initial uncorrected one which will still produce good results.

Use the Archiver to install the database and adjust the configuration as required. Compatible with Serendipity Blackmagic V3.1 and Serendipity Megarip V4.1 and above.

This is a BlackMagic default database for the Canon 8500 using Canon 8500 Gloss Photo paper - at 600dpi x 600dpi, Best printing mode with CMYKLcLm inks installed (use light inks enabled).

The database contains Paper profiles, linearisation curves and ICC profiles, along with default Pagesetup that uses it. Use the Database Manager to load this archive and select the parts that you want to add to your database.

You will probably need to create a new linearisation curve but once done, you can load the ICC profiles and get a good proof out. This may need tweeking to achieve optimal quality output.

Download

This is a database file with the full configuration for an Epson 4000 with UltraChrome ink (photo black) and Epson Premium Luster Photo 250 paper. The calibration was done at 720 x 720 dpi and includes Paper Profile, Linearisation and ICC profiles.

Use the Archiver to install the database and adjust the configuration as required.

Compatible with Serendipity Blackmagic V3 and Serendipity Megarip V4 and above.

Download

This a a database containing Paper Profiles for the Epson 4000 at different resolutions. These are 360x360dpi, 360x720dpi, 720x360dpi, 720x720dpi, 1440x720dpi, 2880x720dpi and were created using Premium SemiGloss Photo Paper with the exception of the 720x720dpi which was with Premium Luster Paper.

These are paper profiles only and have the ink limits on default.

Use the Database Manager to install and the Paper Profile Modifier to set the ink limits.

This is a database with a default configuration and calibration for the Epson 4800 printer with the K3 inks running Epson Premium Semi Gloss Photo 250 paper.

Ink batch differences and machine differences may alter the quality of the output but it should be a good start. Re-linearisation may be all that is required.

Use the Archiver to install the database and adjust the configuration as required.

Only compatible with Serendipity Blackmagic V3.1 or greater and Serendipity Megarip V4.1 or greater.

Download

This is a database with full configuration for the Epson 4800.

The database includes calibration (Paper profile, Linearisation and ICC profiles) built with K3 inks (Photo Black) and Fuji Semi Gloss Proofing Paper at 720 x 720 dpi.

Included are 3 printer profiles. One created from one pass and calculated max dot area of 400%, one from same pass with max dot area of 370% and a third created with iteration - corrected using the Fogra ISO Coated as the target. If you have a license to use Fogra ICC profiles then this will produce the most accutate results. Otherwise choose one of the other profiles or create your own.

Use the Archiver to install the database and adjust the configuration as required.

Compatible with Serendipity Blackmagic V3.1 and Serendipity Megarip V4.1 and above.

This is a BlackMagic default database for the Epson 7000/9000 Dye using Epson Premium SemiGloss Photo Weight paper - No. S041393/S041394/S041395 at 720dpi x 720dpi.

The database contains Paper profiles, linearisation curves and ICC profiles along with default Pagesetup that uses it.

Use the Database Manager to load this archive and select the parts you want to add to your database. You will probably need to create a new linearisation curve, but once done you can load the ICC profiles and get a good proof out. This may need tweeking to achieve optimal quality output.

Download

This is a BlackMagic default database for the Epson 7500/9500 Pigment using Epson Premium SemiGloss Photo Weight paper - No. S041393/S041394/S041395 at 720dpi x 720dpi.

The database contains Paper profiles, linearisation curves and ICC profiles along with default Pagesetup that uses it.

Use the Database Manager to load this archive and select the parts you want to add to your database. You will probably need to create a new linearisation curve, but once done you can load the ICC profiles and get a good proof out. This may need tweaking to achieve optimal quality output.

Download

This is a Blackmagic default database for the Epson 7600/9600 Pigment using Epson Glossy Paper - Photo Weight - No. S041388/S041389 at 720dpi x 720dpi.

The database contains Paper profiles, linearisation curves and ICC profiles, along with default Pagesetup that uses it. Use the Database Manager to load this archive and select the parts that you want to add to your database.

You will probably need to create a new linearisation curve but once done, you can load the ICC profiles and get a good proof out. This may need tweaking to achieve optimal quality output.

Download

This is a BlackMagic default database for the Epson 7600/9600 Pigment using Epson Premium Luster Photo paper - No. S041461/S041462/S041463 at 720dpi x 720dpi.

The database contains Paper profiles, linearisation curves and ICC profiles, along with default Pagesetup that uses it. Use the Database Manager to load this archive and select the parts that you want to add to your database.

You will probably need to create a new linearisation curve but once done, you can load the ICC profiles and get a good proof out. This may need tweaking to achieve optimal quality output.

Download

This is a BlackMagic default database for the Epson 7600/9600 Pigment using Epson Premium SemiGloss Photo Weight paper - No. S041393/S041394/S041395 at 720dpi x 720dpi.

The database contains Paper profiles, linearisation curves and ICC profiles, along with default Pagesetup that uses it. Use the Database Manager to load this archive and select the parts that you want to add to your database.

You will probably need to create a new linearisation curve but once done, you can load the ICC profiles and get a good proof out. This may need tweaking to achieve optimal quality output.

Download

This is a BlackMagic default database for the Epson 7600/9600 Pigment using Epson Smooth Fine Art paper (roll) - No. S041431/S041432/S041433 at 720dpi x 720dpi.

The database contains Paper profiles, linearisation curves and ICC profiles, along with default Pagesetup that uses it. Use the Database Manager to load this archive and select the parts that you want to add to your database.

You will probably need to create a new linearisation curve but once done, you can load the ICC profiles and get a good proof out. This may need tweaking to achieve optimal quality output.

Download

This is a database with a default configuration and calibration for the Epson 7800/9800 printer with the K3 inks running Epson Premium Glossy Photo paper.

Calibration was done at 1440 x 1440 dpi in Bi-Driection mode. Ink batch differences and machine differences may alter the quality of the output but it should be a good start. Re-linearisation may be all that is required.

Use the Archiver to install the database and adjust the configuration as required.

Only compatible with Serendipity Blackmagic V3.1 or greater and Serendipity Megarip V4.1 or greater.

Download

This is a database with a default configuration and calibration for the Epson 7800/9800 printer with the K3 inks (Photo Black) running Epson Premium Glossy Photo paper.

The calibration was done at 720 x 720dpi. Ink batch differences and machine differences may alter the quality of the output but it should be a good start. Re-linearisation may be all that is required.

The database includes two ICC profiles, one created in the first pass with base configuration and the other created with a second pass with iteration correction. The correction was based on the Fogra ISO Coated target. If you have a license to use this profile then this will be more accurate otherwise use the uncorrected one.

Use the Archiver to install the database and adjust the configuration as required.

Only compatible with Serendipity Blackmagic V3.1 or greater and Serendipity Megarip V4.1 or greater.

Download

This is a database with a default configuration and calibration for the Epson 7800/9800 printer with the K3 inks (Photo Black) running Epson Premium Luster 250 paper.

The calibration was done at 720dpi x 720dpi. Ink batch differences and machine differences may alter the quality of the output but it should be a good start. Re-linearisation may be all that is required.

The database includes two ICC profiles, one created in the first pass with base configuration and the other created with a second pass with iteration correction. The correction was based on the Fogra ISO Coated target. If you have a license to use this profile then this will be more accurate otherwise use the uncorrected one.

Use the Archiver to install the database and adjust configuration as required.

Only compatible with Serendipity Blackmagic V3.1 or greater and Serendipity Megarip V4.1 or greater.

Download

This is a database file with full configuration for Epson 7800/9800 printer with K3 Inks (photo black).

The calibration includes paper profile, linearisation and ICC created using Epson Premium Semi Gloss Photo paper at 720 x 720 dpi. Printer and ink batches vary but re-linearisation may be all that is required for quality output.

Use the Archiver to install the database and adjust the configuration as required.

Compatible with Serendipity Blackmagic V3.1 and Serendipity Megarip V4.1 and over.

Download

This is an archive sdb file, which contains the configuration for driving an Epson 7880/9880 with Epson Proofing Paper Semi Matte 250 at 720 x 720 dpi. This configuration uses the "Treat Light Inks as Separate Channels" option.

The archive contains Pagesetup with Paper Profile, Linearisation Curve, Printer ICC and Output configuration.

This is for Serendipity Blackmagic v3.5 and Serendipity Megarip v4.5 and greater.

Download the file and use the Archiver to install. Check the configuration for your input and monitor ICC profiles, and the correct destination setup and save.

Note: This was setup on an Epson 7880. If you have an Epson 9880 you should change the Custom Settings in the Pagesetup to the correct device.

Download

This is an archive sdb file which contains the configuration for driving an Epson 7880/9880 with Epson Proofing Paper Semi Matte 250 at 720 x 720 dpi.

The archive contains Pagesetup with Paper Profile, Linearisation curve, Printer ICC and Output configuration.

This is for Serendipity Blackmagic v3.5 and Serendipity Megarip v4.5 and greater.

Download the file and use the Archiver to install. Check the configuration for your input and monitor ICC profiles, and the correct destination setup and save.

Download

This is an archive sdb file which contains the configuration for driving an Epson 7880/9880 with Epson SemiGloss 250 Paper at 720 x 720 dpi. This configuration uses the "treat light inks as separate channels" option.

The archive contains Pagesetup with Paper Profile, Linearisation curve, Printer ICC and Output configuration.

This is for Serendipity Blackmagic V3.5 and Serendipity Megarip V4.5 and greater.

Download the file and use the Archiver to install. Check the configuration for input and monitor ICC profiles, and the correct destination setup and save.

Note: This was setup on an Epson 7880. If you have an Epson 9880 you should change the Custom Settings in the Pagesetup to the correct device.

Download

Configuration for Epson 7880/9880 with SemiGloss 170 Paper at 720 x 720 dpi (v3.5/4.5)

This is an archive sdb file which contains the configuration for driving an Epson 7880/9880 with Epson Semi Gloss 170 at 720 x 720 dpi. This configuration uses the "Treat Light Inks as Separate Channels" option.

The archive contains Pagesetup with Paper Profile, Linearisation curve, Printer ICC and Output configuration.

This is for Serendipity Blackmagic V3.5 and Serendipity Megarip V4.5 and greater.

Download the file and use the Archiver to install. Check the configuration for input and monitor ICC profiles, and the correct destination setup and save.

Note: This was setup on an Epson 7880. If you have an Epson 9880 then you should change the Custom Settings in the Pagesetup to the correct device.

Download

This is a database file with full configuration for the Epson 7600/9600 Printers with UltraChrome Inks (photo black).

The database includes Paper Profiles, Linearisation and ICC profiles created at 720 dpi x 720 dpi on Epson Premium Glossy Photo Paper 250. Printer and ink batches differ but you may just need to relinearise for calibrated output.

Use the Archiver to install the database and adjust the configuration as required.

Compatible with Serendipity Blackmagic V3 and Serendipity Megarip V4 or higher.

Download

This is a BlackMagic default database for the Epson 10000CF using Epson Premium SemiGloss Photo Weight paper - No. S041393/S041394/S041395 at 720dpi x 720dpi.

The database contains Paper profiles, linearisation curves and ICC profiles along with default Pagesetup that uses it.

Use the Database Manager to load this archive and select the parts you want to add to your database. You will probably need to create a new linearisation curve, but once done you can load the ICC profiles and get a good proof out. This may need tweaking to achieve optimal quality output.

Download

This is a BlackMagic default database for the Epson 10600 using Premium Glossy Photo Paper - No.S041390/S041391/S041392 at 720dpi x 720dpi.

The database contains Paper profiles, linearisation curves and ICC profiles along with default Pagesetup that uses it.

Use the Database Manager to load this archive and select the parts you want to add to your database. You will probably need to create a new linearisation curve but once done you can load the ICC profiles and get a good proof out. This may need tweaking to achieve optimal quality output.

Download

This is a BlackMagic default database for the Epson 10600 using NewsPrint at 720dpi x 720dpi.

The database contains Paper profiles, linearisation curves and ICC profiles along with default Pagesetup that uses it.

Use the Database Manager to load this archive and select the parts you want to add to your database. You will probably need to create a new linearisation curve but once done you can load the ICC profiles and get a good proof out. This may need tweaking to achieve optimal quality output.

Download

Download

This is an archive sdb file which contains the configuration for driving an Epson 11880 with Epson SemiGloss170 at 720 x 720 dpi.

The archive contains Pagesetup with Paper Profile, Linearisation curve, Printer ICC and Output configuration.

This is for Serendipity Blackmagic V3.5 and Serendipity Megarip V4.5 and greater.

Download the file and use the Archiver to install. Check the configuration for input and monitor ICC profiles, and the correct destination setup and save.

Download

This is a BlackMagic default database for the HP 10/20/50 PS using HP Coated Inkjet paper - at 600 x 600 dpi Best printing mode.

The database contains Paper profiles, linearisation curves and ICC profiles along with default Pagesetup that uses it.

Use the Database Manager to load this archive and select the parts you want to add to your database. You will probably need to create a new linearisation curve but once done you can load the ICC profiles and get a good proof out. This may need tweaking to achieve optimal quality output.

Download

This is a BlackMagic default database for the HP 10/20/50 PS using HP Proofing Gloss paper - at 600 x 600 dpi, Best printing mode.

The database contains Paper profiles, linearisation curves and ICC profiles along with default Pagesetup that uses it.

Use the Database Manager to load this archive and select the parts you want to add to your database. You will probably need to create a new linearisation curve but once done you can load the ICC profiles and get a good proof out. This may need tweaking to achieve optimal quality output.

Download

This is a BlackMagic default database for the HP 10/20/50 PS using HP Proofing Matte paper - at 600 x 600 dpi, Best printing mode.

The database contains Paper profiles, linearisation curves and ICC profiles along with default Pagesetup that uses it.

Use the Database Manager to load this archive and select the parts you want to add to your database. You will probably need to create a new linearisation curve but once done you can load the ICC profiles and get a good proof out. This may need tweaking to achieve optimal quality output.

Download

This is a database file with full configuration for the HP 90 printer. The calibration was done at 600 x 600 dpi with Best quality set using Fuji Semi Gloss Proofing paper.

The database includes paper profile, linearisation and ICC profiles. There are two printer ICC profiles included, one created in the first pass using the base configuration and the other created with a second pass using an iteration correction. The correction was based on Fogra ISO Coated paper and if you have a license to use this target profile then the corrected printer profile will have higher accuracy. Otherwise use the standard ICC.

Use the Archiver to install the database and then adjust configuration as required.

Compatible with Serendipity Blackmagic V3.1 and Serendipity Megarip V4.1 and higher.

Download

This is a BlackMagic default database for the HP 120 using Plain Paper at 300 x 300 dpi Normal printing mode.

This contains a Paper Profile and linearisation curve.

Install the database with the Database Manager and check your ink limits using the Paper Profile Modifier prior to re-linearising. Tweaking may be required to acheive optimum output.

Download

This is a BlackMagic default database for the HP 120 using HP Premium Photo Gloss at 1200 x 1200 dpi Premium printing mode.

The database contains Paper profiles, linearisation curves and ICC profiles along with default Pagesetup that uses it.

Use the Database Manager to load this archive and select the parts you want to add to your database. You will probably need to create a new linearisation curve but once done you can load the ICC profiles and get a good proof out. This may need tweaking to achieve optimal quality output.

Download

This is a BlackMagic default database for the HP 120 using HP Premium Photo Gloss at 600 x 600 dpi Best printing mode.

The database contains Paper profiles, linearisation curves and ICC profiles along with default Pagesetup that uses it.

Use the Database Manager to load this archive and select the parts you want to add to your database. You will probably need to create a new linearisation curve but once done you can load the ICC profiles and get a good proof out. This may need tweaking to achieve optimal quality output.

Download

Download

This is a paper profile for the HP 1050/1055/2000/3000 series of printers.

Use the Database Manager to install it. You can then use the paper profile modifier to make copies of it and to configure the ink limits for your particular media.

Download

This is a BlackMagic default database for the HP 5000 dye using HP Photo Imaging Gloss paper - No. C6963A/C6964A/C6965A at 600 x 600 dpi.

The database contains Paper profiles, and ICC profiles along with default Pagesetup that uses it.

Use the Database Manager to load this archive and select the parts you want to add to your database. This may need tweaking to achieve optimal quality output.

Download

This is a database for the HP 5500 running end of roll NewsPrint. It is using CMYK Dye inks only at 600 x 600 dpi with the print quality set to "normal".

It includes Paper Profile, linearisation, correction LUT and ICC profiles.

To install open the archive in the Database Manager, select the items you want and install them into your BlackMagic.

Download

This is a database archive file with a basic configuration for printing on Newsprint with the HP T1100. It uses CMYK only and with the black as Matte black.

It contains pagesetup, with paper profile, linearisation and Printer ICC (you will need to update the monitor and match ICC) along with output and destination (you will need to update the destination).

To install download the sdb file and open it in the Archiver. Select the nodes you want and choose Add to database.

Download

This is a database archive file with a basic configuration for printing on Photogloss with the HP T1100 using best quality settings.

It contains pagesetup, with paper profile, linearisation and Printer ICC (you will need to update the monitor and match ICC) along with output and destination (you will need to update the destination).

To install download the sdb file and open it in the Archiver. Select the nodes you want and choose Add to database.

Download

This is a database archive file with a basic configuration for printing on Proofing Semigloss media with the HP Z6100 using normal quality settings.

It contains pagesetup, with paper profile, linearisation and Printer ICC (you will need to update the monitor and match ICC) along with output and destination (you will need to update the destination).

To install download the sdb file and open it in the Archiver. Select the nodes you want and choose Add to database.

Download

This is a BlackMagic default database for the Roland FJ400/FJ500/FJ600 using Roland PHSP media at 720 x 720dpi using all eight inks including orange and green.

The database contains Paper profiles, linearisation curves and ICC profiles along with default Pagesetup that uses it.

Use the Database Manager to load this archive and select the parts that you want to add to your database. You will probably need to create a new linearisation curve but once done you can load the ICC profiles and get a good proof out. This may need tweaking to achieve optimal quality output.

Download

This is a BlackMagic default database for the Roland FJ400/FJ500/FJ600 using Roland PHSP media at 720 x 720dpi.

The database contains Paper profiles, linearisation curves and ICC profiles along with default Pagesetup that uses it.

Use the Database Manager to load this archive and select the parts that you want to add to your database. You will probably need to create a new linearisation curve but once done you can load the ICC profiles and get a good proof out. This may need tweaking to achieve optimal quality output.

Download

This is a BlackMagic default database for the Roland FJ400/FJ500/FJ600 using Roland DPP media at 1440 x 720dpi using LightInks as well. This is also compatable for use with Pictorico DCP paper.

The database contains Paper profiles, linearisation curves and ICC profiles along with default Pagesetup that uses it.

Use the Database Manager to load this archive and select the parts that you want to add to your database. You will probably need to create a new linearisation curve but once done you can load the ICC profiles and get a good proof out. This may need tweaking to achieve optimal quality output.

Download

This is a BlackMagic default database for the Roland FJ400/FJ500/FJ600 using Roland DPP media at 720 x 720dpi using LightInks as well. This is also compatable for use with Pictorico DCP paper.

The database contains Paper profiles, linearisation curves and ICC profiles along with default Pagesetup that uses it.

Use the Database Manager to load this archive and select the parts that you want to add to your database. You will probably need to create a new linearisation curve but once done you can load the ICC profiles and get a good proof out. This may need tweaking to achieve optimal quality output.

Download

This is a BlackMagic default database for the Roland FJ540/SJ740/540 and CJ540 using Roland JPET at 720 x 720 dpi.

The database contains Paper profiles, linearisation curves and ICC profiles along with default Pagesetup that uses it.

Use the Database Manager to load this archive and select the parts you want to add to your database. You will probably need to create a new linearisation curve but once done you can load the ICC profiles and get a good proof out. This may need tweaking to achieve optimal quality output.

Download

This is a paper profile for the Techsage SpinJet using the HP1055 printer.

Use the Database Manager to install it. You can use the paper profile modifier to make copies of it and to configure the ink limits for your particular media.

Download